It is never enjoyable to notice a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that continues on your Dodge Ram? Any gearbox issue can be important, but before making sure, it is better to do a few investigations. Our team has made this paper to support you deal with it. First, we will see what the sources and the different gearbox noises can be on Dodge Ram, and second, what are the solutions available to you.
Classical reverse Dodge Ram noises and some tips to maintain your gearbox
Why does the reversing of my Dodge Ram make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound created by the reversing of your Dodge Ram is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will exert on the gears will be enormous and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Dodge Ram if you shift gear under these conditions.
Diverse Dodge Ram reversing noises and their triggers
Finally in this section, we will move on to what you are probably most curious about in this content, to find out about the cause of reversing noise on Dodge Ram. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Dodge Ram, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this content page for more info about strut mount noises on Dodge Ram.
An increased reverse knocking noise on Dodge RamX
If you are subject to a knocking noise when you are in reverse with your Dodge Ram and this noise tends to amplify as you gain speed. It is conceivable that you are confronting a serious issue that needs to be fixed right away before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your technician quickly or browse this content page about gearbox noise on Dodge Ram for more information.
I hear a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dodge Ram reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
