It is never pleasing to hear a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that lasts on your Dodge Durango? Any gearbox issue can be critical, but before making sure, it is better to do a few inspections. Our team has made this document to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Dodge Durango, and second, what are the solutions available to you.
Classical reverse Dodge Durango noises and some tips to maintain your gearbox
Why does the reversing of my Dodge Durango make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise created by the reversing of your Dodge Durango is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will apply on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Dodge Durango if you shift gear under these conditions.
Several Dodge Durango reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this page, to learn about the origin of reversing noise on Dodge Durango. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Dodge Durango, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this paper for more information about strut mount noises on Dodge Durango.
An increased reverse knocking noise on Dodge DurangoX
If you are subject to a knocking noise when you are in reverse with your Dodge Durango and this noise tends to amplify as you gain speed. It is possible that you are experiencing a serious issue that needs to be fixed as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears very fast. Take your automobile to your auto mechanic quickly or browse this content about gearbox noise on Dodge Durango for more information.
I find out a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dodge Durango reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
