It is never enjoyable to find out a sound on your car that you don’t know where it comes from. You may be wanting to know what to do when you detect a reversing gear noise that remains on your Dodge Charger? Any gearbox trouble can be critical, but before making sure, it is better to do a few checks. Our team has created this article to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Dodge Charger, and second, what are the solutions available to you.
Classical reverse Dodge Charger noises and some tips to maintain your gearbox
Why does the reversing of my Dodge Charger make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The noise caused by the reversing of your Dodge Charger is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be significant and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Dodge Charger if you shift gear under these conditions.
Several Dodge Charger reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this document, to learn about the origin of reversing noise on Dodge Charger. Here are the 3 typical noises you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you find out a grinding noise when you start in reverse with your Dodge Charger, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this paper for more information about strut mount noises on Dodge Charger.
An increased reverse knocking noise on Dodge ChargerX
If you are subject to a knocking noise when you are in reverse with your Dodge Charger and this noise tends to amplify as you gain speed. It is possible that you are confronting a serious trouble that needs to be solved right away before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears before long. Take your car to your mechanic quickly or browse this content about gearbox noise on Dodge Charger for more data.
I find out a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dodge Charger reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
