It is never pleasurable to listen to a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that remains on your Bmw Serie 1 F20? Any gearbox issue can be important, but before making sure, it is better to do a few investigations. Our team has created this paper to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Bmw Serie 1 F20, and second, what are the solutions available to you.reverse-gear-noise-bmw-serie-1-f20

Classical reverse Bmw Serie 1 F20 noises and some tips to look after your gearbox

Why does the reversing of my Bmw Serie 1 F20 make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound caused by the reversing of your Bmw Serie 1 F20 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears used for the reverse gear.

Tips to reduce wear on your clutch and gearbox

  • Don’t give a big boost:
    In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the vehicle is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you listen to a reverse noise on your Bmw Serie 1 F20 if you shift gear under these conditions.

Different Bmw Serie 1 F20 reversing noises and their origins

Finally in this section, we will move on to what you are probably most curious about in this document, to find out about the origin of reversing noise on Bmw Serie 1 F20. Here are the 3 typical sounds you may be victim of.

I experience a grinding noise when starting in reverse gear

If you listen to a grinding noise when you start in reverse with your Bmw Serie 1 F20, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check this content page for more details about strut mount noises on Bmw Serie 1 F20.

An increased reverse knocking noise on Bmw Serie 1 F20X

If you are subject to a knocking noise when you are in reverse with your Bmw Serie 1 F20 and this noise tends to build up as you gain speed. It is conceivable that you are confronting a serious issue that needs to be resolved fairly quickly before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears in short order. Take your vehicle to your auto mechanic quickly or check out this content page about gearbox noise on Bmw Serie 1 F20 for more details.

I perceive a noise when I go in reverse

Experiencing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Bmw Serie 1 F20 reverse gear makes more noise than before, it is conceivable that filings have been created and are moving around in it. It is therefore time to empty the box.