It is never pleasurable to notice a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you notice a reversing gear noise that continues on your Audi Sq7? Any gearbox problem can be important, but before making sure, it is better to do a few inspections. Our team has written this content page to help you resolve it. First, we will see what the origins and the different gearbox noises can be on Audi Sq7, and second, what are the solutions available to you.
Classical reverse Audi Sq7 noises and some tips to look after your gearbox
Why does the reversing of my Audi Sq7 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise caused by the reversing of your Audi Sq7 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will exert on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you find out a reverse noise on your Audi Sq7 if you shift gear under these conditions.
Several Audi Sq7 reversing noises and their origins
Finally in this section, we will move on to what you are probably most curious about in this document, to learn about the origin of reversing noise on Audi Sq7. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Audi Sq7, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this content for more details about strut mount noises on Audi Sq7.
An increased reverse knocking noise on Audi Sq7X
If you are subject to a knocking noise when you are in reverse with your Audi Sq7 and this noise tends to increase as you gain speed. It is possible that you are going through a serious problem that needs to be solved as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your auto technician quickly or browse this document about gearbox noise on Audi Sq7 for more information.
I hear a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Sq7 reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
