It is never pleasant to hear a sound on your automobile that you don’t know where it comes from. You may be wanting to know what to do when you notice a reversing gear noise that persists on your Audi Q5? Any gearbox problem can be critical, but before making sure, it is better to do a few inspections. Our team has written this article to support you solve it. First, we will see what the sources and the different gearbox noises can be on Audi Q5, and second, what are the solutions available to you.
Classical reverse Audi Q5 noises and some tips to look after your gearbox
Why does the reversing of my Audi Q5 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult task. The sound caused by the reversing of your Audi Q5 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be monumental and you will make a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you perceive a reverse noise on your Audi Q5 if you shift gear under these conditions.
Different Audi Q5 reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this document, to find out about the source of reversing noise on Audi Q5. Here are the 3 typical sounds you may be victim of.
I find out a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Audi Q5, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to browse this paper for more details about strut mount noises on Audi Q5.
An increased reverse knocking noise on Audi Q5X
If you are subject to a knocking noise when you are in reverse with your Audi Q5 and this noise tends to increase as you gain speed. It is plausible that you are experiencing a serious problem that needs to be solved rather quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your auto mechanic quickly or read this article about gearbox noise on Audi Q5 for more information.
I acknowledge a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Q5 reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
