When you locate unusual noises on your Volkswagen Lupo you tend to be concerned. Specifically when you experience a noise coming from the release bearing of your Volkswagen Lupo. It is instantly assimilated to an engine issue and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to create this content page to help you find the causes and free yourself from this concern as quickly as possible. To do this, we will first concentrate on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Volkswagen Lupo and their origins.
What is the task and operation of the release bearing on Volkswagen Lupo?
Task of the release bearing on Volkswagen Lupo
The release bearing of your Volkswagen Lupo has a essential role in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Volkswagen Lupo.
Action of release bearing Volkswagen Lupo
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Volkswagen Lupo :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, in contrast to the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the form most used in modern cars. It is however more elaborate than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Volkswagen Lupo and their origins
I experience a release bearing noise on Volkswagen Lupo every time I drive and it stops when I depress my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to replace the release bearing of your Volkswagen Lupo.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is damaged. Indeed, this noise often comes from the broken fork that no longer allows the system to operate normally.
I experience a grinding noise coming from the release bearing of my Volkswagen Lupo when I try to shift gears and they do not shift
This concern happens most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Volkswagen Lupo, then you probably have a leak coming from your release bearing. It must therefore be swapped almost instantly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Volkswagen Lupo and it’s not from your release bearing, check this article to have more informations.
