When you observe unusual noises on your Volkswagen Golf 3 you usually tend to be anxious. Especially when you experience a noise coming from the release bearing of your Volkswagen Golf 3. It is instantly assimilated to an engine problem and can therefore be serious. As we know that you do not take these concerns lightly, we have chosen to make this article content to support you locate the triggers and free yourself from this matter as quickly as possible. To do this, we will first concentrate on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Volkswagen Golf 3 and their origins.
What is the role and operation of the release bearing on Volkswagen Golf 3?
Task of the release bearing on Volkswagen Golf 3
The release bearing of your Volkswagen Golf 3 has a fundamental role in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Volkswagen Golf 3.
Function of release bearing Volkswagen Golf 3
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (based on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Volkswagen Golf 3 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, unlike the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the type most used in modern cars. It is however more complex than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Volkswagen Golf 3 and their origins
I experience a release bearing noise on Volkswagen Golf 3 when I drive and it stops when I depress my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Volkswagen Golf 3.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is damaged. Indeed, this noise often comes from the broken fork that no longer allows the device to run normally.
I experience a grinding noise coming from the release bearing of my Volkswagen Golf 3 when I try to shift gears and they do not shift
This matter arises most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Volkswagen Golf 3, then you probably have a leak coming from your release bearing. It must therefore be replaced promptly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Volkswagen Golf 3 and it’s not from your release bearing, check this article to have more informations.
