When you identify unusual noises on your Toyota Matrix you tend to be anxious. Especially when you encounter a noise coming from the release bearing of your Toyota Matrix. It is instantly assimilated to an engine issue and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to write this article to support you find the causes and free yourself from this matter as quickly as possible. To do this, we will first concentrate on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Toyota Matrix and their sources.
What is the purpose and operation of the release bearing on Toyota Matrix?
Purpose of the release bearing on Toyota Matrix
The release bearing of your Toyota Matrix has a fundamental function in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Toyota Matrix.
Function of release bearing Toyota Matrix
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different sort of release bearing Toyota Matrix :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two sort of release bearing . This one, as opposed to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the form most used in modern automobiles. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Toyota Matrix and their sources
I encounter a release bearing noise on Toyota Matrix once I drive and it stops when I release my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to change the release bearing of your Toyota Matrix.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is associated with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the system to run normally.
I encounter a grinding noise coming from the release bearing of my Toyota Matrix when I try to shift gears and they do not shift
This matter shows up most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Toyota Matrix, then you probably have a leak coming from your release bearing. It must therefore be changed quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Toyota Matrix and it’s not from your release bearing, check this article to have more informations.
