When you detect unusual noises on your Suzuki Jimny you commonly tend to be troubled. Especially when you encounter a noise coming from the release bearing of your Suzuki Jimny. It is immediately assimilated to an engine trouble and can therefore be serious. As we know that you do not take these trouble lightly, we have decided to make this document to help you find the triggers and free yourself from this matter as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Suzuki Jimny and their sources.release-bearing-noise-suzuki-jimny

What is the task and operation of the release bearing on Suzuki Jimny?

Role of the release bearing on Suzuki Jimny

The release bearing of your Suzuki Jimny has a essential function in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Suzuki Jimny.

Action of release bearing Suzuki Jimny

Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct types of release bearing Suzuki Jimny :

  • Pulled release bearing
  • It is the most unconventional of the two types of release bearing . This one, unlike the hydraulic version, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.

  • Hydraulic release bearing
  • The hydraulic release bearing, although more complex, is the kind most used in modern cars. It is however more elaborate than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
    More conventional clutch stop

Release bearing noises Suzuki Jimny and their sources

I encounter a release bearing noise on Suzuki Jimny once I drive and it stops when I release my clutch pedal

If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Suzuki Jimny.

I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot

If you encounter too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. Indeed, this noise often comes from the broken fork that no longer allows the system to function normally.

I encounter a grinding noise coming from the release bearing of my Suzuki Jimny when I try to shift gears and they do not shift

This matter arises most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Suzuki Jimny, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Suzuki Jimny and it’s not from your release bearing, check this article to have more informations.