When you discover unusual noises on your Peugeot 807 you tend to be troubled. Specifically when you feel a noise coming from the release bearing of your Peugeot 807. It is instantly assimilated to an engine problem and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to make this article to help you find the causes and free yourself from this matter as quickly as possible. To do this, we will first focus on the role and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Peugeot 807 and their sources.
What is the role and operation of the release bearing on Peugeot 807?
Purpose of the release bearing on Peugeot 807
The release bearing of your Peugeot 807 has a crucial role in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Peugeot 807.
Action of release bearing Peugeot 807
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct kind of release bearing Peugeot 807 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two kind of release bearing . This one, unlike the hydraulic form, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the kind most used in modern cars. It is however more elaborate than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Peugeot 807 and their sources
I feel a release bearing noise on Peugeot 807 once I drive and it stops when I depress my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to change the release bearing of your Peugeot 807.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is degraded. In fact, this noise often comes from the broken fork that no longer allows the device to run normally.
I feel a grinding noise coming from the release bearing of my Peugeot 807 when I try to shift gears and they do not shift
This matter appears most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Peugeot 807, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Peugeot 807 and it’s not from your release bearing, check this article to have more informations.
