When you detect unusual noises on your hyundai i30 you have a tendency to get worried. Especially when you experience a noise coming from the release bearing of your hyundai i30. It is directly assimilated to an engine problem and can therefore be serious. As we know that you do not take these concerns lightly, we have decided to write this content to help you find the triggers and free yourself from this matter as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on hyundai i30 and their origins.
What is the function and operation of the release bearing on hyundai i30?
Task of the release bearing on hyundai i30
The release bearing of your hyundai i30 has a crucial function in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is operated by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your hyundai i30.
Action of release bearing hyundai i30
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (based on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct sort of release bearing hyundai i30 :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two sort of release bearing . This one, contrary to the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the kind most used in contemporary automobiles. It is however more complex than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure straight from the clutch pedal.
More conventional clutch stop
Release bearing noises hyundai i30 and their origins
I experience a release bearing noise on hyundai i30 in cases where I drive and it stops when I release my clutch pedal
If you experience a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly plausible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which case it is time to swap the release bearing of your hyundai i30.
I experience a release bearing noise when my pedal is up and I experience jolts in my foot
If you experience too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can experience in your clutch pedal, then the stop/fork release/blades grouping is degraded. Indeed, this noise often comes from the broken fork that no longer allows the device to function normally.
I experience a grinding noise coming from the release bearing of my hyundai i30 when I try to shift gears and they do not shift
This matter appears most often on models equipped with hydraulic release bearing. It is often associated with a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your hyundai i30, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your hyundai i30 and it’s not from your release bearing, check this article to have more informations.
