Finding out a strange noise from your vehicle does not tend to reassure, and although it may be nothing major, it is also plausible that it is an indication of an important failure on approach. Recognizing a noise originating from the rear end of your Ram ProMaster may signal a trip to your garage sooner or later, like just a rock in the tread of a wheel. To help you check out the causes, our team has written this article which should help you to see more clearly. First, we will discover what the different noises and problems connected with your Ram ProMaster rear end noise are, and second, what your solutions are if the issue is not included in this list.
Components that can cause noise in the rear end of my Ram ProMaster
Rear end loud noise Ram ProMaster
If you establish a loud noise on the rear end of your Ram ProMaster, it may be relating to your wheels. Indeed, the wheels can be at the origin of this vibration. Two options are then possible, first of all, wheel balancing may be defective (loss of lead weight which fulfils this function), which causes an imbalance in the wheel’s logical path and therefore its vibration. To examine this, examine look at the presence of your balancing seals on your rims. Finally, it is also plausible that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your Ram ProMaster. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will occur. Whatever the case, remember to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Bear in mind to go under your Ram ProMaster while the engine is running and verify the sound of your exhaust pipe to identify possible exhaust gas leaks. If you detect of a loud noise but the reason is not present here, we encourage that you browse this article relating to loud noise on Ram ProMaster, which might give you more ideas.
Rear end noise slamming Ram ProMaster coming from your suspension
If you identify a clicking noise on the rear axle of your Ram ProMaster, it is plausible that the suspension part of your vehicle may be damaged. Indeed, when the steering unit of your vehicle is activated, the damping unit of your vehicle may be the reason of the issue. Indeed, it is not unusual for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Bear in mind to verify the condition of these two elements. For more details, see our article on suspension noise on Ram ProMaster.
Squeaky noise rear end Ram ProMaster caused by your bearings
A squeaking noise in the rear end of your Ram ProMaster can also be a consequence of precipitate wear of your bearings. Indeed, bearings have a significant function in the proper handling of the vehicle while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can generate sounds close to a creaking sound if they are worn. Bear in mind to verify their condition. If you want more info about bearing noise on Ram ProMaster, it’s here.
What if I still haven’t find a solution for the rear end noise of my Ram ProMaster
If you still haven’t found a remedy despite the different possibilities described here and the noise from the rear end of your Ram ProMaster remains, it is plausible that the issue is relating to other mechanical elements and that this failure is less common. Feel free to read this content on suspension noise on Ram ProMaster which will eventually give you other ideas to help you solve your issue. Do not leave this issue lying around in any case and take your car to your auto mechanic to preserve your vehicle and your safety.
