Listening a mystery noise from your automobile does not tend to reassure, and although it could be not a big deal, it is also plausible that it is a signal of a big failure on approach. Noticing a noise based on the rear end of your Jeep Wrangler may indicate a trip to your mechanic sooner or later, like just a rock in the tread of a tire. To support you discover the causes, our team has produced this content page which might support you to see more clearly. First, we will see what the different noises and problems connected with your Jeep Wrangler rear end noise are, and second, what your solutions are if the trouble is not included in this list.
Elements that can generate noise in the rear end of my Jeep Wrangler
Rear end loud noise Jeep Wrangler
If you find a loud noise on the rear end of your Jeep Wrangler, it may be linked to your wheels. Indeed, the wheels can be at the source of this vibration. Two possibilities are then possible, firstly, wheel balancing may be defective (loss of lead weight which fulfils this purpose), which leads to an imbalance in the wheel’s logical path and therefore its vibration. To examine this, take a look at look at the presence of your balancing seals on your rims. Finally, it is also plausible that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your Jeep Wrangler. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will arise. In any case, bear in mind to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Keep in mind to go under your Jeep Wrangler while the engine is running and verify the sound of your exhaust pipe to detect possible exhaust gas leaks. If you note of a loud noise but the cause is not present here, we suggest that you read this content page about loud noise on Jeep Wrangler, which may perhaps give you more ideas.
Rear end noise slamming Jeep Wrangler coming from your suspension
If you experience a clicking noise on the rear axle of your Jeep Wrangler, it is plausible that the suspension part of your automobile may be affected. Indeed, when the steering unit of your automobile is activated, the damping unit of your automobile may be the cause of the trouble. Indeed, it is not abnormal for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Keep in mind to verify the condition of these two elements. For more details, browse our article on suspension noise on Jeep Wrangler.
Squeaky noise rear end Jeep Wrangler provided by your bearings
A squeaking noise in the rear end of your Jeep Wrangler can also derive from premature wear of your bearings. Indeed, bearings play an important purpose in the proper handling of the automobile while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure exerted on the bearings is higher than if you turn slowly, it can create sounds close to a creaking sound if they are worn. Keep in mind to verify their condition. If you want more info about bearing noise on Jeep Wrangler, it’s here.
What if I still haven’t find a solution for the rear end noise of my Jeep Wrangler
If you still haven’t found an answer despite the different alternatives described here and the noise from the rear end of your Jeep Wrangler continues, it is plausible that the trouble is linked to other mechanical elements and that this failure is less common. Feel free to consult this article on suspension noise on Jeep Wrangler which will eventually give you other ideas to support you solve your trouble. Do not leave this trouble lying around in any case and take your car to your technician to preserve your automobile and your safety.
