Occasionally your vehicle can generate sounds in the front right, you are very certainly not reassured by this sort of noise and you automatically start to presume that you will loose a wheel or that the repair will cost you an astronomical sum. So, what if you detect a noise coming from the front right of your Peugeot 207? It may not be much and you can fix the problem yourself, but if in doubt it is better to verify before a larger troubles appears. It is with this in mind that we have decided to write this article and allow you to discover the problem and find a treatment. We will, through few steps review all the components that can make noises at the front right of your Peugeot 207. front-right-noise-peugeot-207

What are the parts that can cause front right noise Peugeot 207?

Most of our article will focus on finding the element that gives your Peugeot 207 front wheel noise. The following is a list of the elements that are most likely to be generating it and how to verify it.

Grinding noise front right wheel Peugeot 207 : the shock absorber cup

One of the most common reason of symptoms on your Peugeot 207 front right wheel noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer fulfils its job and during small jolts that compress the suspension systems. To verify if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider changing them promptly as this may damage other parts and require more expensive repairs.

Noise while turning front right Peugeot 207 : stabilizer bar

If you find out a noise when turning on your front right wheel Peugeot 207 at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To verify the source of the problem, you may find a lack of stability in the direction of the automobile (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.

Front right noise when turning Peugeot 207 : direction triangles

Finally, you may have a noise in the front right wheel on your Peugeot 207, when you increase the speed of, brake or at any other random moment. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your mechanic.

Loud knocking or grinding noise front right Peugeot 207 : bearings

One of the other likely causes of symptoms of the front right grinding or knocking noise on your Peugeot 207, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So you should verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noises on Peugeot 207, you will surely find a response to your problem.

Front right wheel noise squeaking Peugeot 207 : cardan shaft

One of the most common causes when noise appears on the front right of your Peugeot 207 when you turn with your automobile is linked to the direction of your automobile. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Peugeot 207, do not hesitate to consult this article to find the solution to your problem.