When you discover uncommon sounds on your Dodge Ram you tend to stress about them. Especially when you feel a noise when you accelerate on your Dodge Ram. It is automatically assimilated to an engine problem and can therefore be considerable. As we know that you do not take these problems lightly, we have decided to write this article to help you find the causes and eliminate this concern as quickly as possible. To do this, we will first see what are the reasons of a high pitched noise when accelerating with my Dodge Ram, then what is a whistling or ratling noise at the acceleration of my Dodge Ram, then the origins of a noise that intensifies during acceleration and to finish a noise that stops when I stop accelerating.
Ma Dodge Ram makes a high-pitched noise when I accelerate:
If your Dodge Ram makes a loud noise when you accelerate, it is quite possible that the alternator belt is the induce of your problem. You will need to establish if this noise takes place suddenly and if it can stop as it started. The alternator belt is a wearing part that is used to supply power to the secondary components of your Dodge Ram’s engine and although it is less vital than the timing belt it can cause engine troubles if it fails. This noise may be a symptom of a slackened belt, in which case the tensioner roller or its wear and tear may be responsible. In any case, verify the condition of your belt and its tension. If it causes this acceleration noise on Dodge Ram, go to your technician.
Ma Dodge Ram makes whining noise when I accelerate:
- Rattling or whistling noise generated by the turbo
- Humming noise caused by air leakage
If you have a power loss that comes with the rattling noise when you accelerate with your Dodge Ram, it is conceivable that your turbo is screwing up and some of its parts are at the end of their life. Check it and swap it if it is the induce, otherwise you risk clogging your engine in the long run. If you find out this blowing or whistling noise on your car, feel free to consult this document about turbo noises on Dodge Ram, if you would like more information.
If, on the other hand, you do not feel any power loss due to an humming noise on your Dodge Ram, it is more than likely that you have one of your junctions or air hoses that has holes. So verify the whole air supply system from your air filter to your engine to locate the origin of this acceleration sound.
Ma Dodge Ram makes an increasingly loud noise when I accelerate:
If, on the other hand, you have the feeling that the more you gain speed, the more your noise at acceleration on Dodge Ram gets loud, then you will have to check out the rolling parts of your car. In fact, if this loud noise does not show up when you iddle, it is surely in connection with your transmission, and, in general, to your wheels. The most basic cause is the state of your bearings, so don’t forget to verify their condition to be sure it is not the cause of this loud noise when you accelerate. If not, go to this document about the noises related to Dodge Ram noise wheels.
Ma Dodge Ram generates a noise when I accelerate that ends when I stop accelerating:
At last, if you experience a noise when accelerating with your Dodge Ram and this noise which could be a cliking sound tends to end when you disengage (press the clutch pedal), then one of the wear parts of your clutch system may be the cause. In fact, the clutch release bearings must be replaced approximately every 120 000 / 130 000km. To test it, you just have to see if you have more difficulty than usual shifting gears, if you feel a resistance either stronger or non-existent in the clutch pedal. If you have any of these signs of illness, go to your technician to replace the clutch release bearings on your Dodge Ram. Read our article on clutch noise on Dodge Ram for more information.
