Sometimes your vehicle can make noises in the front axle, you are very certainly not reassured by this kind of noise and you immediately tend to presume that you will lose a wheel or that the fix will cost you an huge amount. Thus, what if you uncover a noise coming from the front end of your Mitsubishi Outlander? It may not be much and you can fix the issue yourself, but if in doubt it is better to verify before a larger failure appears. It is with this in mind that we have chosen to compose this article and allow you to find out the issue and find a treatment. We will, through several steps review all the components that can produce noises at the front end of your Mitsubishi Outlander. 
What are the elements that can cause front axle noise Mitsubishi Outlander?
Most of our work will focus on finding the element that gives your Mitsubishi Outlander front wheel noise. The following is a list of the components that are most likely to be causing it and how to validate it.
Noise vibration front end Mitsubishi Outlander : the shock absorber cup
One of the most likely causes of symptoms on your Mitsubishi Outlander front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them promptly as this may affect other parts and require more pricey repairs.
Noise while turning front end Mitsubishi Outlander : stabilizer bar
If you detect of a noise on your Mitsubishi Outlander at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To validate the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). In addition, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front axle noise when turning Mitsubishi Outlander : direction triangles
Finally, you may have a noise in the front wheel on your Mitsubishi Outlander, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your mechanic.
Loud noise front end Mitsubishi Outlander : bearings
One of the other probable origins of symptoms of the front axle of your Mitsubishi Outlander, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So be sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them promptly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noise on Mitsubishi Outlander, you will certainly find a response to your issue.
Front end noise squeaking Mitsubishi Outlander : cardan shaft
One of the most traditional causes when noise happens on the front axle of your Mitsubishi Outlander when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Mitsubishi Outlander, do not hesitate to consult this article to find the solution to your problem.
