Do you listen to a metallic noise on your Volkswagen Crafter 2 every time you drive? We know that this is not relaxing and that you are wandering. Hearing such a noise is not always a good sign, but it may also be nothing major. To help you remedy this issue, our redaction decided to compose this article to assist you in this investigation. In order to execute this research as efficiently as possible, we will first check out the conceivable sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Volkswagen Crafter 2 coming from the front end of the automobile
I perceive a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible causes of metal noise symptoms on your Volkswagen Crafter 2, may be that one of your bearing is tired, it will frequently produce a loud noise that goes up when stressed (turns faster and faster). So keep in mind to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on loud noise on Volkswagen Crafter 2, you will most likely find a remedy to your issue.
If you encounter a metalic noise on Volkswagen Crafter 2 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your automobile on safety stand, and check the condition of your discs and pads by getting rid of the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want infos about it, browse this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Volkswagen Crafter 2, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we advise that you consult this article for a complete guide about steering noises on Volkswagen Crafter 2.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Volkswagen Crafter 2. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, take into account to check their status and change them if needed. Feel free to consult this article which is a complete file about strut mounts noises on Volkswagen Crafter 2, how to check their condition and change them.
Finally, the last common trigger of metallic noise on Volkswagen Crafter 2. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the sources of steering noises on Volkswagen Crafter 2.
Metallic noise Volkswagen Crafter 2 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the trigger of this sound. To be certain, go under the automobile, cold, and knock each of the previously stated parts with a hammer to identify the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider swapping it, as well as the silencer. In this instance, to eliminate the metallic noise on your Volkswagen Crafter 2, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is conceivable that with wear they are at the origin of your metallic noises on your Volkswagen Crafter 2. Go a little further up in the article content where you will find details of the solution already exposed for the front part of the automobile.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
