Do you perceive a metallic noise on your Mitsubishi Asx when ever you drive? We can understand that this is not pleasurable and that you have questions. Experiencing such a noise is not always a good signal, but it may also be nothing serious. To support you eliminate this issue, our redaction decided to compose this content page to assist you in this research. In order to accomplish this research as efficiently as possible, we will first take a look at the plausible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Mitsubishi Asx coming from the front end of the vehicle
I notice a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible causes of metal noise symptoms on your Mitsubishi Asx, may be that one of your bearing is tired, it will commonly make a loud noise that increase when stressed (turns faster and faster). So think about to examine by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Mitsubishi Asx, you will most likely find a remedy to your issue.
If you hear a metalic noise on Mitsubishi Asx and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the condition of your discs and pads by removing the wheel. If they are involved, replace them as soon as possible , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want explications about it, go through this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Mitsubishi Asx, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To examine this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we recommend that you read this content page for a complete guide about steering noises on Mitsubishi Asx.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mitsubishi Asx. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, please remember to examine their status and replace them if needed. Feel free to consult this content page which is a complete file about strut mounts noises on Mitsubishi Asx, how to examine their condition and swap them.
Finally, the last classic cause of metallic noise on Mitsubishi Asx. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you browse this detailed guide on the sources of steering noises on Mitsubishi Asx.
Metallic noise Mitsubishi Asx coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be certain, go under the vehicle, cold, and knock each of the previously stated elements with a hammer to locate the source of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on replacing it, as well as the silencer. In this case, to eliminate the metallic noise on your Mitsubishi Asx, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is plausible that with wear they are at the origin of your metallic noises on your Mitsubishi Asx. Go a little further up in the content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
