Do you hear a metallic noise on your Mazda MX 5 Miata every time you drive? We understand that this is not relaxing and that you have questions. Experiencing such a noise is not always a good sign, but it may also be nothing major. To support you solve this issue, our team has decided to create this article content to help you in this investigation. In order to perform this research as effectively as possible, we will first look into the conceivable origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Mazda MX 5 Miata coming from the front end of the car
I notice a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise symptoms on your Mazda MX 5 Miata, may be that one of your bearing is tired, it will tend to make a loud noise that increase when stressed (turns faster and faster). So bear in mind to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Mazda MX 5 Miata, you will most likely find a remedy to your issue.
If you experience a metalic noise on Mazda MX 5 Miata and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the state of your discs and pads by taking out the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want explications about it, browse this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your Mazda MX 5 Miata, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we advise that you browse this article content for a complete guide about steering noises on Mazda MX 5 Miata.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mazda MX 5 Miata. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, think about to examine their status and change them if required. Feel free to have a look at this article content which is a complete file about strut mounts noises on Mazda MX 5 Miata, how to examine their state and replace them.
Finally, the last common reason of metallic noise on Mazda MX 5 Miata. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you look at this detailed guide on the origins of steering noises on Mazda MX 5 Miata.
Metallic noise Mazda MX 5 Miata coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the reason of this sound. To be sure, go under the car, cold, and knock each of the previously stated parts with a hammer to identify the origin of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on changing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Mazda MX 5 Miata, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is conceivable that with wear they are at the origin of your metallic noises on your Mazda MX 5 Miata. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
