Do you hear a metallic noise on your Mazda 2 when ever you drive? We can understand that this is not pleasurable and that you have questions. Finding out such a noise is not always a good indicator, but it may also be nothing severe. To support you eliminate this issue, we have decided to create this content to assist you in this search. In order to accomplish this research as effectively as possible, we will first have a look at the plausible sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Mazda 2 coming from the front end of the automobile
I listen a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise symptoms on your Mazda 2, may be that one of your bearing is tired, it will commonly produce a loud noise that increase when stressed (turns faster and faster). So remember to examine by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this article on loud noise on Mazda 2, you will most likely find a solution to your issue.
If you discern a metalic noise on Mazda 2 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a strong metallic rubbing noise that you will inevitably feel. To examine this, put your automobile on safety stand, and examine the state of your discs and pads by removing the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your automobile, and you want explications about it, read this article for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Mazda 2, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, put yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend highly that you have a look at this content for a complete guide about steering noises on Mazda 2.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mazda 2. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, please remember to examine their status and change them if required. Feel free to browse this content which is a complete file about strut mounts noises on Mazda 2, how to examine their state and swap them.
Finally, the last typical cause of metallic noise on Mazda 2. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you read this detailed guide on the origins of steering noises on Mazda 2.
Metallic noise Mazda 2 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be sure, go under the automobile, cold, and knock each of the previously stated components with a hammer to define the source of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider changing it, as well as the silencer. In such a case, to stop the metallic noise on your Mazda 2, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is plausible that with wear they are at the origin of your metallic noises on your Mazda 2. Go a little further up in the article where you will find information of the solution already exposed for the front part of the automobile.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
