Do you experience a metallic noise on your hyundai i40 once you drive? We understand that this is not enjoyable and that you are wandering. Listening such a noise is not always a good indication, but it may also be nothing severe. To help you remedy this trouble, we have decided to create this content to assist you in this investigation. In order to conduct this research as effectively as possible, we will first take a look at the conceivable sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise hyundai i40 coming from the front end of the vehicle
I notice a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise symptoms on your hyundai i40, may be that one of your bearing is tired, it will frequently generate a loud noise that goes up when stressed (turns faster and faster). So keep in mind to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on hyundai i40, you will most likely find a solution to your trouble.
If you encounter a metalic noise on hyundai i40 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the state of your discs and pads by taking away the wheel. If they are involved, swap them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want infos about it, browse this article for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you notice a metallic noise on your hyundai i40, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To examine this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we would suggest that you read this content for a complete guide about steering noises on hyundai i40.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your hyundai i40. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, think about to examine their status and swap them if needed. Feel free to have a look at this content which is a complete file about strut mounts noises on hyundai i40, how to examine their state and change them.
Finally, the last common reason of metallic noise on hyundai i40. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we would suggest that you browse this detailed guide on the origins of steering noises on hyundai i40.
Metallic noise hyundai i40 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the reason of this sound. To be certain, go under the vehicle, cold, and knock each of the previously stated elements with a hammer to identify the source of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In this case, to eliminate the metallic noise on your hyundai i40, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your hyundai i40. Go a little further up in the content where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
