Do you perceive a metallic noise on your hyundai i20 once you drive? We understand that this is not enjoyable and that you have questions. Listening such a noise is not always a good signal, but it may also be nothing serious. To help you remedy this issue, our redaction decided to write this article to assist you in this search. In order to carry out this research as accurately as possible, we will first have a look at the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise hyundai i20 coming from the front end of the car
I acknowledge a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise symptoms on your hyundai i20, may be that one of your bearing is tired, it will commonly generate a loud noise that increase when stressed (turns faster and faster). So take into account to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well established here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this report on loud noise on hyundai i20, you will most likely find a remedy to your issue.
If you discern a metalic noise on hyundai i20 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the state of your discs and pads by taking away the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want explications about it, browse this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you acknowledge a metallic noise on your hyundai i20, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, position yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend that you read this article for a complete guide about steering noises on hyundai i20.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your hyundai i20. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, think about to examine their status and replace them if required. Feel free to browse this article which is a complete file about strut mounts noises on hyundai i20, how to examine their state and replace them.
Finally, the last basic reason of metallic noise on hyundai i20. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend that you look at this detailed guide on the sources of steering noises on hyundai i20.
Metallic noise hyundai i20 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the reason of this sound. To be certain, go under the car, cold, and knock each of the previously stated components with a hammer to discern the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In such a case, to eliminate the metallic noise on your hyundai i20, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your hyundai i20. Go a little further up in the article content where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
