Do you perceive a metallic noise on your hyundai i10 when ever you drive? We can understand that this is not enjoyable and that you are wandering. Experiencing such a noise is not always a good indication, but it may also be nothing severe. To support you solve this trouble, we have decided to create this article content to help you in this search. In order to execute this research as efficiently as possible, we will first have a look at the plausible origins of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise hyundai i10 coming from the front end of the automobile
I hear a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible causes of metal noise manifestations on your hyundai i10, may be that one of your bearing is tired, it will commonly make a loud noise that raises when stressed (turns faster and faster). So remember to examine by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well established here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this guide on loud noise on hyundai i10, you will most likely find a solution to your trouble.
If you hear a metalic noise on hyundai i10 and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To examine this, put your automobile on safety stand, and examine the condition of your discs and pads by getting rid of the wheel. If they are involved, replace them fairly quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your automobile, and you want explications about it, read this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you hear a metallic noise on your hyundai i10, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, put yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we suggest that you read this article content for a complete guide about steering noises on hyundai i10.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your hyundai i10. Once screwed up, they will no longer accomplish their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, remember to examine their status and replace them if required. Feel free to have a look at this article content which is a complete file about strut mounts noises on hyundai i10, how to examine their condition and change them.
Finally, the last basic reason of metallic noise on hyundai i10. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we suggest that you read this detailed guide on the origins of steering noises on hyundai i10.
Metallic noise hyundai i10 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. In fact, it is plausible that either the catalyst or the silencer may be the reason of this noise. To be sure, go under the automobile, cold, and knock each of the previously stated parts with a hammer to determine the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In such a case, to eliminate the metallic noise on your hyundai i10, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is plausible that with wear they are at the origin of your metallic noises on your hyundai i10. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the automobile.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
