Do you listen to a metallic noise on your Honda Fit when you drive? We know that this is not pleasant and that you have questions. Finding out such a noise is not always a good signal, but it may also be nothing major. To support you fix this problem, we have decided to write this article content to help you in this investigation. In order to perform this research as effectively as possible, we will first have a look at the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Honda Fit coming from the front end of the car
I perceive a metal rattling noise coming from wheels
- Metallic noise coming from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise manifestations on your Honda Fit, may be that one of your bearing is tired, it will commonly generate a loud noise that goes up when stressed (turns faster and faster). So take into account to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well established here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this report on loud noise on Honda Fit, you will most likely find a remedy to your problem.
If you experience a metalic noise on Honda Fit and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by removing the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your car, and you want informations about it, examine this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Honda Fit, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will induce a metallic snap when they hit or change direction. To check this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we recommend that you have a look at this article content for a complete guide about steering noises on Honda Fit.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Honda Fit. Once screwed up, they will no longer accomplish their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to check their status and swap them if needed. Feel free to browse this article content which is a complete file about strut mounts noises on Honda Fit, how to check their state and swap them.
Finally, the last classic reason of metallic noise on Honda Fit. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend that you read this detailed guide on the origins of steering noises on Honda Fit.
Metallic noise Honda Fit coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the reason of this sound. To be sure, go under the car, cold, and knock each of the previously stated units with a hammer to establish the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In this case, to stop the metallic noise on your Honda Fit, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your Honda Fit. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
