Do you hear a metallic noise on your Honda Accord when you drive? We know that this is not relaxing and that you are wandering. Finding out such a noise is not always a good sign, but it may also be nothing major. To support you solve this problem, we have decided to prepare this article to help you in this research. In order to accomplish this research as accurately as possible, we will first look into the possible sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Honda Accord coming from the front end of the automobile
I acknowledge a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise symptoms on your Honda Accord, may be that one of your bearing is tired, it will commonly produce a loud noise that increases when stressed (turns faster and faster). So keep in mind to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on loud noise on Honda Accord, you will most likely find a solution to your problem.
If you discern a metalic noise on Honda Accord and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To examine this, put your automobile on safety stand, and examine the state of your discs and pads by getting rid of the wheel. If they are involved, change them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your automobile, and you want explications about it, browse this guide for more information about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you acknowledge a metallic noise on your Honda Accord, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we encourage that you have a look at this article for a complete guide about steering noises on Honda Accord.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Honda Accord. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, take into account to examine their status and change them if needed. Feel free to browse this article which is a complete file about strut mounts noises on Honda Accord, how to examine their state and replace them.
Finally, the last typical reason of metallic noise on Honda Accord. It’s because your transmission system is the source. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we encourage that you look at this detailed guide on the sources of steering noises on Honda Accord.
Metallic noise Honda Accord coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the reason of this noise. To be certain, go under the automobile, cold, and knock each of the previously stated units with a hammer to discern the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider swapping it, as well as the silencer. In such a case, to eliminate the metallic noise on your Honda Accord, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is possible that with wear they are at the origin of your metallic noises on your Honda Accord. Go a little further up in the content where you will find details of the solution already exposed for the front part of the automobile.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
