Do you perceive a metallic noise on your Chrysler 300 when ever you drive? We can understand that this is not enjoyable and that you are wandering. Hearing such a noise is not always a good indicator, but it may also be nothing severe. To help you fix this trouble, our team has decided to produce this content to assist you in this search. In order to accomplish this research as efficiently as possible, we will first take a look at the possible origins of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Chrysler 300 coming from the front end of the automobile
I listen a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise manifestations on your Chrysler 300, may be that one of your bearing is tired, it will commonly generate a loud noise that increases when stressed (turns faster and faster). So remember to verify by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this report on loud noise on Chrysler 300, you will most likely find a solution to your trouble.
If you experience a metalic noise on Chrysler 300 and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will create a strong metallic rubbing noise that you will inevitably feel. To verify this, put your automobile on safety stand, and verify the state of your discs and pads by taking away the wheel. If they are involved, swap them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your automobile, and you want infos about it, read this article for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen a metallic noise on your Chrysler 300, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To verify this, put yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we suggest that you read this content for a complete guide about steering noises on Chrysler 300.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Chrysler 300. Once screwed up, they will no longer fulfill their purpose as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, bear in mind to verify their status and swap them if required. Feel free to have a look at this content which is a complete file about strut mounts noises on Chrysler 300, how to verify their state and replace them.
Finally, the last common cause of metallic noise on Chrysler 300. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we suggest that you read this detailed guide on the sources of steering noises on Chrysler 300.
Metallic noise Chrysler 300 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you notice an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. Indeed, it is possible that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the automobile, cold, and knock each of the previously stated elements with a hammer to discern the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to reflect on swapping it, as well as the silencer. In this instance, to eliminate the metallic noise on your Chrysler 300, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is possible that with wear they are at the origin of your metallic noises on your Chrysler 300. Go a little further up in the content page where you will find information of the solution already exposed for the front part of the automobile.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
