Do you experience a metallic noise on your Chrysler 200 when you drive? We understand that this is not relaxing and that you are wandering. Experiencing such a noise is not always a good signal, but it may also be nothing major. To support you remedy this issue, our redaction decided to write this content page to assist you in this research. In order to accomplish this research as accurately as possible, we will first check out the possible sources of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.metal-noise-chrysler-200

Metal noise Chrysler 200 coming from the front end of the automobile

I perceive a metal rattling noise coming from wheels

  • Metallic noise based on your bearing
  • One of the probable causes of metal noise symptoms on your Chrysler 200, may be that one of your bearing is tired, it will commonly produce a loud noise that raises when stressed (turns faster and faster). So keep in mind to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this article on loud noise on Chrysler 200, you will most likely find a remedy to your issue.

  • Metalic noise coming from brake
  • If you discern a metalic noise on Chrysler 200 and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the cause. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To examine this, put your automobile on safety stand, and examine the state of your discs and pads by getting rid of the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you experience a metallic noise from your automobile, and you want infos about it, read this guide for more details about brake noises on xxx.

  • Stabilizer bar worn
  • If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Chrysler 200, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, put yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend highly that you consult this content page for a complete guide about steering noises on Chrysler 200.

Other sources

>

  • Engine silentblock
  • A little like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Chrysler 200. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will arise. Therefore, keep in mind to examine their status and change them if required. Feel free to browse this content page which is a complete file about strut mounts noises on Chrysler 200, how to examine their state and replace them.

  • Dead gearbox, or broken pinion
  • Finally, the last common cause of metallic noise on Chrysler 200. It’s because your transmission system is the origin. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you read this detailed guide on the sources of steering noises on Chrysler 200.

Metallic noise Chrysler 200 coming from the rear end of the vehicle

Exhaust pipe

If, on the other hand, you feel an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the cause of this sound. To be certain, go under the automobile, cold, and knock each of the previously stated parts with a hammer to discern the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider changing it, as well as the silencer. In this instance, to stop the metallic noise on your Chrysler 200, you will either have to find a second hand one and do it yourself, or go to your mechanic.

Noise from wheels

  • Bearings
  • As for the bearings of your automobile, it is possible that with wear they are at the origin of your metallic noises on your Chrysler 200. Go a little further up in the content where you will find information of the solution already exposed for the front part of the automobile.

  • Brake pads or discs
  • Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.