On occasion your automobile can make noises in the front axle, you are very almost never reassured by this sort of noise and you directly tend to presume that you will lose a wheel or that the fix will cost you an massive sum. Thus, what if you discern a noise coming from the front end of your Mazda CX 7? It may not be much and you can correct the issue yourself, but if in doubt it is better to verify before a larger problem occurs. It is with this in mind that we have chosen to produce this document and allow you to discover the issue and find a solution. We will, through some steps review all the components that can generate noises at the front end of your Mazda CX 7. front-axle-noise-mazda-cx-7

What are the elements that can cause front axle noise Mazda CX 7?

Most of our job will focus on finding the element that gives your Mazda CX 7 front wheel noise. The following is a list of the components that are most likely to be producing it and how to verify it.

Noise vibration front end Mazda CX 7 : the shock absorber cup

One of the most common reason of symptoms on your Mazda CX 7 front axle noise is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them soon as this may affect other components and require more costly repairs.

Noise while turning front end Mazda CX 7 : stabilizer bar

If you find out of a noise on your Mazda CX 7 at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is malfunctioning. To verify the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.

Front axle noise when turning Mazda CX 7 : direction triangles

Finally, you may have a noise in the front wheel on your Mazda CX 7, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto technician.

Loud noise front end Mazda CX 7 : bearings

One of the other possible causes of symptoms of the front axle of your Mazda CX 7, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them soon. If, on the other hand, this noise only appears with an engaged speed, check out our article on loud noise on Mazda CX 7, you will probably find an answer to your issue.

Front end noise squeaking Mazda CX 7 : cardan shaft

One of the most traditional causes when noise appears on the front axle of your Mazda CX 7 when you turn with your vehicle is in connection with the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Mazda CX 7, do not hesitate to consult this article to find the solution to your problem.