Sometimes your vehicle can make noises in the front axle, you are very almost never reassured by this kind of noise and you right away tend to think that you will lose a wheel or that the fix will cost you an huge sum. Then, what if you discern a noise coming from the front end of your Chevrolet Cruze? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to verify before a larger damage takes place. It is with this in mind that we have chosen to produce this document and allow you to find out the trouble and find a treatment. We will, through several steps review all the elements that can make noises at the front end of your Chevrolet Cruze. front-axle-noise-chevrolet-cruze

What are the elements that can cause front axle noise Chevrolet Cruze?

Most of our job will focus on finding the element that gives your Chevrolet Cruze front wheel noise. The following is a list of the components that are most likely to be producing it and how to validate it.

Noise vibration front end Chevrolet Cruze : the shock absorber cup

One of the most common reason of symptoms on your Chevrolet Cruze front axle noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the trouble that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them soon as this may damage other parts and require more expensive repairs.

Noise while turning front end Chevrolet Cruze : stabilizer bar

If you detect of a noise on your Chevrolet Cruze at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To validate the origin of the trouble, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). In addition, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.

Front axle noise when turning Chevrolet Cruze : direction triangles

Finally, you may have a noise in the front wheel on your Chevrolet Cruze, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this trouble comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your technician.

Loud noise front end Chevrolet Cruze : bearings

One of the other likely causes of symptoms of the front axle of your Chevrolet Cruze, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So be sure you verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them soon. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noise on Chevrolet Cruze, you will surely find a response to your trouble.

Front end noise squeaking Chevrolet Cruze : cardan shaft

One of the most traditional causes when noise happens on the front axle of your Chevrolet Cruze when you turn with your vehicle is linked to the direction of your vehicle. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Chevrolet Cruze, do not hesitate to consult this article to find the solution to your problem.