In some cases your automobile can make noises in the front axle, you are very almost never reassured by this kind of noise and you instantly tend to presume that you will lose a wheel or that the repair will cost you an huge amount. Thus, what if you recognize a noise coming from the front end of your Hyundai Genesis? It may not be much and you can correct the issue yourself, but if in doubt it is better to verify before a larger failure takes place. It is with this in mind that we have chosen to produce this content and allow you to find the issue and find a solution. We will, through some steps review all the components that can produce noises at the front end of your Hyundai Genesis. 
What are the elements that can cause front axle noise Hyundai Genesis?
Most of our job will focus on finding the element that gives your Hyundai Genesis front wheel noise. The following is a list of the components that are most likely to be producing it and how to validate it.
Noise vibration front end Hyundai Genesis : the shock absorber cup
One of the most likely causes of symptoms on your Hyundai Genesis front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them as soon as possible as this may affect other parts and require more pricey repairs.
Noise while turning front end Hyundai Genesis : stabilizer bar
If you find out of a noise on your Hyundai Genesis at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To validate the origin of the issue, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Front axle noise when turning Hyundai Genesis : direction triangles
Finally, you may have a noise in the front wheel on your Hyundai Genesis, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your mechanic.
Loud noise front end Hyundai Genesis : bearings
One of the other possible origins of symptoms of the front axle of your Hyundai Genesis, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them as soon as possible. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noise on Hyundai Genesis, you will certainly find a solution to your issue.
Front end noise squeaking Hyundai Genesis : cardan shaft
One of the most common causes when noise shows up on the front axle of your Hyundai Genesis when you turn with your automobile is linked to the direction of your automobile. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Hyundai Genesis, do not hesitate to consult this article to find the solution to your problem.
