Occasionally your automobile can generate sounds in the front right, you are very almost never reassured by this types of noise and you immediately begin to presume that you will loose a wheel or that the repair will cost you an astronomical sum. Thus, what if you discern a noise coming from the front right of your Hyundai Accent? It may not be much and you can fix the issue yourself, but if in doubt it is better to check before a larger troubles shows up. It is with this in mind that we have decided to write this content and allow you to locate the issue and find a solution. We will, through different steps review all the elements that can create noises at the front right of your Hyundai Accent. 
What are the components that can generate front right noise Hyundai Accent?
Most of our article will concentrate on finding the component that gives your Hyundai Accent front wheel noise. The following is a list of the elements that are most likely to be creating it and how to confirm it.
Grinding noise front right wheel Hyundai Accent : the shock absorber cup
One of the most common causes of symptoms on your Hyundai Accent front right wheel noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer assumes its job and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them quickly as this may damage other components and necessitate more pricey repairs.
Noise while turning front right Hyundai Accent : stabilizer bar
If you find out a noise when turning on your front right wheel Hyundai Accent at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the composents of your stabilizer bar that is defective. To confirm the origin of the issue, you may feel a lack of balance in the direction of the automobile (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Hyundai Accent : direction triangles
Finally, you may have a noise in the front right wheel on your Hyundai Accent, when you speed up, brake or at any other random moment. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Hyundai Accent : bearings
One of the other probable causes of symptoms of the front right grinding or knocking noise on your Hyundai Accent, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noises on Hyundai Accent, you will certainly find a response to your issue.
Front right wheel noise squeaking Hyundai Accent : cardan shaft
One of the most common causes when noise happens on the front right of your Hyundai Accent when you turn with your automobile is connected to the direction of your automobile. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Hyundai Accent, do not hesitate to consult this article to find the solution to your problem.
