In some cases your vehicle can make noises in the front axle, you are very almost never reassured by this kind of noise and you straightaway tend to presume that you will lose a wheel or that the repair will cost you an astronomical amount. Thus, what if you identify a noise coming from the front end of your Hyundai Accent? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger damage occurs. It is with this in mind that we have decided to produce this article and allow you to locate the issue and find a solution. We will, through different steps review all the components that can generate noises at the front end of your Hyundai Accent. 
What are the elements that can cause front axle noise Hyundai Accent?
Most of our job will focus on finding the element that gives your Hyundai Accent front wheel noise. The following is a list of the components that are most likely to be producing it and how to confirm it.
Noise vibration front end Hyundai Accent : the shock absorber cup
One of the most common reason of symptoms on your Hyundai Accent front axle noise is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, think about changing them promptly as this may affect other components and require more pricey repairs.
Noise while turning front end Hyundai Accent : stabilizer bar
If you recognise of a noise on your Hyundai Accent at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is defective. To confirm the origin of the issue, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Hyundai Accent : direction triangles
Finally, you may have a noise in the front wheel on your Hyundai Accent, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud noise front end Hyundai Accent : bearings
One of the other probable causes of symptoms of the front axle of your Hyundai Accent, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So be sure you check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them promptly. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noise on Hyundai Accent, you will probably find an answer to your issue.
Front end noise squeaking Hyundai Accent : cardan shaft
One of the most traditional causes when noise shows up on the front axle of your Hyundai Accent when you turn with your car is related to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Hyundai Accent, do not hesitate to consult this article to find the solution to your problem.
