If you too have already experienced a grinding noise on Volkswagen Polo 3, you must have wondering the same questions as all Volkswagen Polo 3 owners. We are rarely reassured when a grinding noise happens on our automobile. As we are conscious of your concerns and questions, we have chosen to compose this content page in order to assist you in and facilitate your quest for a solution to your problem. To do this, first we will see what the origins of a grinding noise on Volkswagen Polo 3 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Volkswagen Polo 3 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-volkswagen-polo-3

I perceive a grinding noise on Volkswagen Polo 3 once I turn the wheel

First, we will look at the grinding noises on Volkswagen Polo 3 that appear every time you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you notice grinding noises on your Volkswagen Polo 3 once you turn the wheels, it may be linked to the hydraulic system of your automobile that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be a sign of a leak of the unit. In this case, please remember to redo the level and verify it frequently. If the problem is persistant, go to your mechanic.

  • Bearings

    • “A grinding noise on Volkswagen Polo 3 once I turn the wheels of my automobile” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Keep in mind to verify their condition.

  • Steering pump

    • Finally, a grinding noise on Volkswagen Polo 3 once I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Take into account to verify that it is working properly.

    If despite these different solutions you continue to experience a grinding noise on Volkswagen Polo 3 when turning your steering wheel, we have wrote a complete content page on this subject that can help you locate the origin.

    I experience a grinding noise on Volkswagen Polo 3 once braking

    If you perceive a grinding noise from the brakes of your Volkswagen Polo 3, it is highly imaginable that it will be linked with brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be changed as soon as possible because they will as soon as possible damage your discs.
    If, despite verification, your grinding noise on Volkswagen Polo 3 does come from your brakes but is not linked to the pads, verify this article content to find out the other plausible origins of brake noises on Volkswagen Polo 3.

    I perceive a grinding noise on Volkswagen Polo 3 at the shock absorbers

    If you are in the situation where you discern the grinding noise on Volkswagen Polo 3 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several explanations that can justify this noise. Indeed, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Volkswagen Polo 3

    at each compression.
    Once you have checked all these areas, you should have found the origin of your trouble, go to your auto mechanic to fix the defective component. If you have not found the origin of your problem, we recommend highly that you look at this article content which discusses all possible origins of shock absorber noise on Volkswagen Polo 3.

    I perceive a grinding noise on Volkswagen Polo 3 at a door

    If that’s not enough, don’t hesitate to look at this full article content on door sounds on Volkswagen Polo 3.
    It is plausible, determined by the type of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and verifying that the grinding noise on your Volkswagen Polo 3 comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to read this complete article content on door sounds on Volkswagen Polo 3.