It appears sometimes that your automobile makes noises from your brakes, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you detect noise from the brake on your Volkswagen Polo 3? It most likely is not some thing severe and you should have the ability to fix it on your own, but when in uncertainty, as with such problem your security and the one from other is in question, it is better to verify before a more serious failure occurs. It’s with idea in mind that we have made the decision to create this document and give you the chance to find the problem and find a solution. We will go through different steps, review all plausible origins of brake noise on Volkswagen Polo 3, and deliver you the causes for them in order to help you fix the problem.
The different sort of brake noise Volkswagen Polo 3 and their origins
The objective of the Volkswagen Polo 3 brakes is to come slow down and stop your vehicule. This component is an essential part of your vehicle’s safety. Hearing a noise from it must therefore be examined immediately and leaving it lying around is not a good solution.
I perceive a grinding noise on my brake Volkswagen Polo 3
If you perceive a grinding or scrap metal noise coming from the brake of your Volkswagen Polo 3, it is highly possible that it will be connected to brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore logically wear out as time passes. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Take out the wheels in question and verify the wear indicator on them. If they are dead, they must be changed quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Volkswagen Polo 3. If after checking out this point, you’re still feeling a grinding noise on your Volkswagen Polo 3, have a look at this article to find a solution.
I feel a continuing noise that stops when I brake with my Volkswagen Polo 3
If you notice a continuous noise from the brakes Volkswagen Polo 3 that only ceases when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam as time passes, especially if they are not used enough. In this case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to reflect on replacing them.
I feel vibration when I brake with my Volkswagen Polo 3
If in your situation, you feel a vibration when braking that would have come from the brake your Volkswagen Polo 3, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can verify it by removing your wheels. If so, replace them or have them replaced by your technician.
I experience a squealing noise when I brake with my Volkswagen Polo 3
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Volkswagen Polo 3, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
