If you too have already notice a grinding noise on Mercedes Benz CLA Class, you must have wondering the same questions as all Mercedes Benz CLA Class owners. We are rarely reassured when a grinding noise shows up on our automobile. As we are conscious of your uncertainties and questions, we have decided to compose this content in order to assist you in and facilitate your quest for a answer to your trouble. To do this, first we will see what the sources of a grinding noise on Mercedes Benz CLA Class are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mercedes Benz CLA Class that comes from the shock absorbers and to finish from one of your doors.grinding-noise-mercedes-benz-cla-class

I perceive a grinding noise on Mercedes Benz CLA Class every time I turn the wheel

First, we will take a look at the grinding noises on Mercedes Benz CLA Class that arise when ever you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you feel grinding noises on your Mercedes Benz CLA Class every time you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be a signal of a leak of the system. In this case, remember to redo the level and check it regularly. If the trouble is persistant, go to your mechanic.

  • Bearings

    • “A grinding noise on Mercedes Benz CLA Class every time I turn the wheels of my automobile” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Please remember to check their state.

  • Steering pump

    • Finally, a grinding noise on Mercedes Benz CLA Class every time I turn may be connected to a tired steering pump power steering pump. The mission of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Consider to check that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Mercedes Benz CLA Class when turning your steering wheel, we have made a complete content page on this subject that can support you discover the origin.

    I listen a grinding noise on Mercedes Benz CLA Class every time braking

    If you perceive a grinding noise from the brakes of your Mercedes Benz CLA Class, it is highly possible that it will be related to brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take off the wheels in question and check the wear indicator on them. If they are dead they will have to be replaced as soon as possible because they will as soon as possible damage your discs.
    If, despite crontrol, your grinding noise on Mercedes Benz CLA Class does come from your brakes but is not connected to the pads, check this content to find out the other conceivable sources of brake noises on Mercedes Benz CLA Class.

    I perceive a grinding noise on Mercedes Benz CLA Class at the shock absorbers

    If you are in the scenario where you detect the grinding noise on Mercedes Benz CLA Class as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can explain this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Mercedes Benz CLA Class

    at each compression.
    Once you have checked all these areas, you should have found the origin of your problem, go to your auto mechanic to repair the defective component. If you have not located the origin of your trouble, we recommend highly that you take a look at this content which discusses all possible origins of shock absorber noise on Mercedes Benz CLA Class.

    I perceive a grinding noise on Mercedes Benz CLA Class at a door

    If that’s not enough, don’t hesitate to look at this complete content on door sounds on Mercedes Benz CLA Class.
    It is conceivable, according to the kind of of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and examining that the grinding noise on your Mercedes Benz CLA Class comes from a hinge that is too dry. To fix this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to take a look at this complete content on door sounds on Mercedes Benz CLA Class.