If you too have already hear a grinding noise on Hyundai Sonata, you must have wondering the same questions as all Hyundai Sonata owners. We are rarely reassured when a grinding noise arises on our vehicle. As we are conscious of your doubts and questions, we have chosen to write this article content in order to assist you in and facilitate your search for a answer to your trouble. To do this, first we will see what the sources of a grinding noise on Hyundai Sonata are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Hyundai Sonata that originates from the shock absorbers and to finish from one of your doors.
I listen to a grinding noise on Hyundai Sonata each time I turn the wheel
First, we will look at the grinding noises on Hyundai Sonata that arise when you turn the wheel of your vehicle. Here are the main explanations for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Hyundai Sonata
If you hear grinding noises on your Hyundai Sonata each time you turn the wheels, it may be linked to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In such a case, the main point to check is the power steering fluid level, which if below the normal level could be an indication of a leak of the unit. In this case, remember to redo the level and check it regularly. If the trouble continues, go to your technician.
“A grinding noise on Hyundai Sonata each time I turn the wheels of my vehicle” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Take into account to check their condition.
Finally, a grinding noise on Hyundai Sonata each time I turn may be relating to a tired steering pump power steering pump. The task of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Remember to check that it is working properly.
If despite these different solutions you continue to experience a grinding noise on Hyundai Sonata when turning your steering wheel, we have produced a complete content page on this subject that can help you find the origin.
I hear a grinding noise on Hyundai Sonata each time braking
If you listen to a grinding noise from the brakes of your Hyundai Sonata, it is highly possible that it will be caused by brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be changed quickly because they will quickly damage your discs.
If, despite verification, your grinding noise on Hyundai Sonata does come from your brakes but is not linked to the pads, check this content to find out the other plausible sources of brake noises on Hyundai Sonata.
I listen to a grinding noise on Hyundai Sonata at the shock absorbers
If you are in the situation where you discern the grinding noise on Hyundai Sonata as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several explanations that can justify this noise. Indeed, you will have to check some points, here they are:
at each compression.
Once you have tested all these areas, you should have found the source of your issue, go to your auto technician to fix the malfunctioning part. If you have not identified the source of your trouble, we encourage that you take a look at this content which discusses all possible origins of shock absorber noise on Hyundai Sonata.
I listen to a grinding noise on Hyundai Sonata at a door
If that’s not enough, don’t hesitate to look at this complete content on door sounds on Hyundai Sonata.
It is plausible, determined by the type of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and checking that
