If you too have already experienced a grinding noise on Fiat Doblo Cargo, you must have asked yourself the same questions as all Fiat Doblo Cargo owners. We are rarely reassured when a grinding noise arises on our car. As we are conscious of your uncertainties and questions, we have chosen to create this article content to be able to support you in and ease your search for a answer to your issue. To do this, first we will see what the origins of a grinding noise on Fiat Doblo Cargo are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat Doblo Cargo that comes from the shock absorbers and to finish from one of your doors.grinding-noise-fiat-doblo-cargo

I listen a grinding noise on Fiat Doblo Cargo every time I turn the wheel

First, we will look into the grinding noises on Fiat Doblo Cargo that take place when ever you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Fiat Doblo Cargo every time you turn the wheels, it may be linked to the hydraulic system of your car that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a sign of a leak of the system. In this case, think about to redo the level and verify it regularly. If the issue is persistant, go to your auto technician.

  • Bearings
  • “A grinding noise on Fiat Doblo Cargo every time I turn the wheels of my car” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Take into account to verify their condition.

  • Steering pump
  • Finally, a grinding noise on Fiat Doblo Cargo every time I turn may be relating to a tired steering pump power steering pump. The task of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Consider to verify that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Fiat Doblo Cargo when turning your steering wheel, we have created a complete content on this subject that can support you discover the origin.

    I hear a grinding noise on Fiat Doblo Cargo every time braking

    If you listen a grinding noise from the brakes of your Fiat Doblo Cargo, it is highly possible that it will be associated with brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped as soon as possible because they will as soon as possible damage your discs.
    If, despite check, your grinding noise on Fiat Doblo Cargo does come from your brakes but is not linked to the pads, verify this content page to find out the other possible sources of brake noises on Fiat Doblo Cargo.

    I listen a grinding noise on Fiat Doblo Cargo at the shock absorbers

    If you are in the scenario where you detect the grinding noise on Fiat Doblo Cargo as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can explain this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Fiat Doblo Cargo

    at each compression.
    Once you have tested all these areas, you should have found the source of your issue, go to your technician to repair the malfunctioning component. If you have not discovered the source of your issue, we would suggest that you take a look at this content page which discusses all possible origins of shock absorber noise on Fiat Doblo Cargo.

    I listen a grinding noise on Fiat Doblo Cargo at a door

    If that’s not enough, don’t hesitate to take a look at this full content page on door sounds on Fiat Doblo Cargo.
    It is possible, depending on the kind of of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and examining that the grinding noise on your Fiat Doblo Cargo comes from a hinge that is too dry. To fix this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to take a look at this complete content page on door sounds on Fiat Doblo Cargo.