If you too have already experience a grinding noise on Chevrolet Avalanche, you must have wondering the same questions as all Chevrolet Avalanche owners. We are rarely reassured when a grinding noise shows up on our vehicle. As we are conscious of your doubts and questions, we have chosen to produce this content to be able to support you in and ease your search for a answer to your problem. To do this, first we will see what the sources of a grinding noise on Chevrolet Avalanche are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Chevrolet Avalanche that originates from the shock absorbers and to finish from one of your doors.grinding-noise-chevrolet-avalanche

I perceive a grinding noise on Chevrolet Avalanche once I turn the wheel

First, we will look at the grinding noises on Chevrolet Avalanche that occur every time you turn the wheel of your vehicle. Here are the main reasons for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Chevrolet Avalanche once you turn the wheels, it may be linked to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In cases like this, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the device. In this case, keep in mind to redo the level and examine it regularly. If the problem is persistant, go to your mechanic.

  • Bearings

    • “A grinding noise on Chevrolet Avalanche once I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Bear in mind to examine their condition.

  • Steering pump

    • Finally, a grinding noise on Chevrolet Avalanche once I turn may be relating to a tired steering pump power steering pump. The task of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Please remember to examine that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on Chevrolet Avalanche when turning your steering wheel, we have wrote a complete content page on this subject that can support you locate the origin.

    I listen to a grinding noise on Chevrolet Avalanche once braking

    If you perceive a grinding noise from the brakes of your Chevrolet Avalanche, it is highly conceivable that it will be caused by brake pads at the end of their life, in fact, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take out the wheels in question and examine the wear indicator on them. If they are dead they will have to be changed almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Chevrolet Avalanche does come from your brakes but is not linked to the pads, examine this article to find out the other plausible sources of brake noises on Chevrolet Avalanche.

    I perceive a grinding noise on Chevrolet Avalanche at the shock absorbers

    If you are in the scenario where you establish the grinding noise on Chevrolet Avalanche as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several reasons that can explain this noise. In fact, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Chevrolet Avalanche

    at each compression.
    Once you have checked out all these elements, you should have found the origin of your issue, go to your technician to fix the malfunctioning component. If you have not located the origin of your problem, we recommend that you take a look at this article which discusses all possible origins of shock absorber noise on Chevrolet Avalanche.

    I perceive a grinding noise on Chevrolet Avalanche at a door

    If that’s not enough, don’t hesitate to look at this full article on door sounds on Chevrolet Avalanche.
    It is plausible, according to the type of noise you note, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and examining that the grinding noise on your Chevrolet Avalanche comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete article on door sounds on Chevrolet Avalanche.