Sometimes your vehicle can make noises in the front axle, you are very hardly ever reassured by this sorts of noise and you immediately tend to presume that you will lose a wheel or that the repair will cost you an astronomical amount. Then, what if you discern a noise coming from a gimbals of your Volkswagen Lupo? It may not be much and you can fix the trouble yourself, but if in doubt it is better to verify before a larger failure takes place. It is with this in mind that we have chosen to produce this document and allow you to find out the trouble and find a treatment. We will, through few steps review all the elements that can produce noises at the front end of your Volkswagen Lupo. 
What are the elements that can cause a noise close to gimbals on Volkswagen Lupo?
Most of our job will focus on finding the element that gives your Volkswagen Lupo gimbals noise. The following is a list of the components that are most likely to be producing it and how to verify it.
Noise vibration that sounds like gimbals on Volkswagen Lupo : the shock absorber cup
One of the most classic causes of noises on Volkswagen Lupo that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the trouble that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them soon as this may affect other components and require more expensive repairs.
Noise while turning that sounds like gimbals Volkswagen Lupo : stabilizer bar
If you recognise of a noise on your Volkswagen Lupo that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To verify the origin of the trouble, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). In addition, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Volkswagen Lupo : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Volkswagen Lupo when you turn with your car is in connection with the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Volkswagen Lupo, do not hesitate to consult this article to find the solution to your problem.
