Occasionally your vehicle can make noises in the front axle, you are very almost never reassured by this kind of noise and you straightaway tend to presume that you will lose a wheel or that the repair will cost you an astronomical sum. Thus, what if you detect a noise coming from a gimbals of your seat cordoba? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have chosen to produce this content and allow you to locate the trouble and find a solution. We will, through several steps review all the elements that can generate noises at the front end of your seat cordoba. 
What are the elements that can cause a noise close to gimbals on seat cordoba?
Most of our article will focus on finding the element that gives your seat cordoba gimbals noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Noise vibration that sounds like gimbals on seat cordoba : the shock absorber cup
One of the most common causes of noises on seat cordoba that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them soon as this may affect other parts and require more pricey repairs.
Noise while turning that sounds like gimbals seat cordoba : stabilizer bar
If you know of a noise on your seat cordoba that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To confirm the origin of the trouble, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning seat cordoba : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your seat cordoba when you turn with your car is linked to the direction of your car. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your seat cordoba, do not hesitate to consult this article to find the solution to your problem.
