On occasion your automobile can make noises in the front axle, you are very certainly not reassured by this types of noise and you immediately tend to think that you will lose a wheel or that the fix will cost you an huge sum. So, what if you detect a noise coming from a gimbals of your Renault Megane 2? It may not be much and you can correct the problem yourself, but if in doubt it is better to examine before a larger troubles shows up. It is with this in mind that we have chosen to produce this article and allow you to find out the problem and find a solution. We will, through few steps review all the elements that can produce noises at the front end of your Renault Megane 2. gimbals-noise-renault-megane-2

What are the elements that can cause a noise close to gimbals on Renault Megane 2?

Most of our work will focus on finding the element that gives your Renault Megane 2 gimbals noise. The following is a list of the components that are most likely to be causing it and how to validate it.

Noise vibration that sounds like gimbals on Renault Megane 2 : the shock absorber cup

One of the most common causes of noises on Renault Megane 2 that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them as soon as possible as this may affect other parts and require more expensive repairs.

Noise while turning that sounds like gimbals Renault Megane 2 : stabilizer bar

If you find out of a noise on your Renault Megane 2 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is malfunctioning. To validate the origin of the problem, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.

Noise when turning Renault Megane 2 : gimbals

One of the most traditional causes when noise appearsand sounds like gimbals on your Renault Megane 2 when you turn with your automobile is related to the direction of your automobile. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Renault Megane 2, do not hesitate to consult this article to find the solution to your problem.