On occasion your car can make noises in the front axle, you are very hardly ever reassured by this types of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an astronomical amount. So, what if you uncover a noise coming from a gimbals of your Peugeot 3008? It may not be much and you can fix the trouble yourself, but if in doubt it is better to verify before a larger failure occurs. It is with this in mind that we have decided to make this document and allow you to find the trouble and find a solution. We will, through few steps review all the components that can produce noises at the front end of your Peugeot 3008. 
What are the elements that can cause a noise close to gimbals on Peugeot 3008?
Most of our job will focus on finding the element that gives your Peugeot 3008 gimbals noise. The following is a list of the components that are most likely to be generating it and how to verify it.
Noise vibration that sounds like gimbals on Peugeot 3008 : the shock absorber cup
One of the most likely causes of noises on Peugeot 3008 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To verify if this is the trouble that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them as soon as possible as this may affect other parts and require more costly repairs.
Noise while turning that sounds like gimbals Peugeot 3008 : stabilizer bar
If you know of a noise on your Peugeot 3008 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is faulty. To verify the origin of the trouble, you may feel a lack of balance in the direction of the automobile (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Peugeot 3008 : gimbals
One of the most traditional causes when noise happensand sounds like gimbals on your Peugeot 3008 when you turn with your automobile is linked to the direction of your automobile. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Peugeot 3008, do not hesitate to consult this article to find the solution to your problem.
