On occasion your vehicle can make noises in the front axle, you are very rarely reassured by this types of noise and you straightaway tend to presume that you will lose a wheel or that the fix will cost you an huge sum. So, what if you detect a noise coming from a gimbals of your Hyundai Kona? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to verify before a larger problem appears. It is with this in mind that we have chosen to make this content and allow you to find out the trouble and find a treatment. We will, through few steps review all the components that can make noises at the front end of your Hyundai Kona. 
What are the elements that can cause a noise close to gimbals on Hyundai Kona?
Most of our work will focus on finding the element that gives your Hyundai Kona gimbals noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Noise vibration that sounds like gimbals on Hyundai Kona : the shock absorber cup
One of the most classic reason of noises on Hyundai Kona that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To verify if this is the trouble that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them promptly as this may damage other parts and require more pricey repairs.
Noise while turning that sounds like gimbals Hyundai Kona : stabilizer bar
If you recognise of a noise on your Hyundai Kona that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To verify the origin of the trouble, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Noise when turning Hyundai Kona : gimbals
One of the most common causes when noise happensand sounds like gimbals on your Hyundai Kona when you turn with your car is connected to the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Hyundai Kona, do not hesitate to consult this article to find the solution to your problem.
