On occasion your automobile can make noises in the front axle, you are very rarely reassured by this types of noise and you instantly tend to presume that you will lose a wheel or that the fix will cost you an astronomical amount. So, what if you recognize a noise coming from the front end of your Ford Crown Victoria? It may not be much and you can correct the issue yourself, but if in doubt it is better to examine before a larger problem occurs. It is with this in mind that we have decided to produce this document and allow you to locate the issue and find a treatment. We will, through few steps review all the elements that can make noises at the front end of your Ford Crown Victoria. 
What are the elements that can cause front axle noise Ford Crown Victoria?
Most of our job will focus on finding the element that gives your Ford Crown Victoria front wheel noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Noise vibration front end Ford Crown Victoria : the shock absorber cup
One of the most likely reason of symptoms on your Ford Crown Victoria front axle noise is advanced wear and tear on your shock system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To examine if this is the issue that worries you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them quickly as this may affect other components and require more expensive repairs.
Noise while turning front end Ford Crown Victoria : stabilizer bar
If you know of a noise on your Ford Crown Victoria at the level of the front end when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front axle noise when turning Ford Crown Victoria : direction triangles
Finally, you may have a noise in the front wheel on your Ford Crown Victoria, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud noise front end Ford Crown Victoria : bearings
One of the other probable origins of symptoms of the front axle of your Ford Crown Victoria, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only appears with an engaged speed, refer to our article on loud noise on Ford Crown Victoria, you will probably find a response to your issue.
Front end noise squeaking Ford Crown Victoria : cardan shaft
One of the most common causes when noise appears on the front axle of your Ford Crown Victoria when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Ford Crown Victoria, do not hesitate to consult this article to find the solution to your problem.
