Do you listen an engine noise on your Hyundai Bayon when you drive? We can understand that this is very distressing and that you are wondering. Discovering such a noise is not always a good indication, but it may also be nothing serious. To support you eliminate this problem, our team has made a decision to produce this article content to help you in this research. In order to conduct this research as accurately as possible, we will first focus on clicking noises, then on whistling noises and, finally, on engine noises on Hyundai Bayon metal type.engine-noise-hyundai-bayon

I listen a clicking engine noise Hyundai Bayon

In case you detect a clicking engine noise on your Hyundai Bayon, and that this noise is close to a click, you will have to identify the source location of it to be able to know the reason of it. You will need a mechanical stethoscope or a large screwdriver to locate the original area of these noises.

I listen a clicking noise coming from my high engine

If you listen an engine noise on Hyundai Bayon, and this noise is located at the top of the engine, it means that it is located at your cylinder head and accompanying components. Two components can be the causes of these engine noises on Hyundai Bayon. Either the hydraulic pushers, generally it is because of their defective “hydraulic catch-up” system that we will listen these clicking noises, often when cold and goes away when hot. Otherwise, it is your the play of your rocker arms or their state of wear that is the concern. In cases like this, reflect on swapping them.

I listen a noise coming from the bottom engine of my Hyundai Bayon

If you have located the place of source of engine noise on Hyundai Bayon that comes from your low engine, it may be that your rods or piston shafts are the causes. In both circumstances, the long-term risk is engine failure. These two fixes are very complex and most technicians will advise you to change the motor of your Hyundai Bayon.

I listen an engine clicking noise on Hyundai Bayon coming from combustion

Finally, if you think that this clicking noise is connected to the combustion of your engine, there are three possible causes of it. Examine the condition of your glow plugs which if worn can hinder the proper combustion of the fuel mixture. Then, your timing belt may be shifted and may poorly manage the timing of the various engine parts to provide good combustion. And finally, the most classic reason, comes from your injection, which is either obstructed or one or more injectors is affected. In this case, do not be reluctant to refer to this article content which deals in detail with the different injector noises on Hyundai Bayon.

Hissing noise / engine friction Hyundai Bayon

Engine noise Hyundai Bayon close to a bearing

If it is close to a squeaking noise you may have one of the bearings of your engine accessory parts that are reached. So examine the condition and try to discover the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to happen in high rpm, accelerate and position someone at the engine block to find the region of origin of the noise. The three components whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump.

Engine noise Hyundai Bayon when releasing or depressing the clutch

In the event that you find engine noise on Hyundai Bayon, but this noise happens mainly when you release or depress your clutch pedal, in this case it is very likely that your release bearing is worn. Indeed, a worn release bearing will emit a noise close to a bell noise. To have more information about this noise and if you have managed to confirm that the release bearing is indeed the cause of your concerns, direction here, to find a complete file on release bearing sounds on Hyundai Bayon.

Engine noise Hyundai Bayon close to a friction

In the case that you listen a motor noise on your Hyundai Bayon, and, that this noise is close to a friction, it is likely that one of your belts or one of the parts that causes it is the source of your concerns.Often, we will start to listen a motor noise on Hyundai Bayon, close to a friction when one of the belts is worn out or when one of the related parts like your alternator, or your tensioner roller is the problem. So take into account to examine their condition and go to your motor mechanic to change the components in question. If you have been able to target the noise as coming from the belts and you want more details about it, go look at this article content on belt noise on Hyundai Bayon for a complete guide.

Metal motor noise Hyundai Bayon

In the case that you listen an engine noise on Hyundai Bayon and this noise is close to metal noise, it is possible that this noise comes from your gearbox or clutch. Indeed, a metallic noise in the engine block is often linked to damaged sprockets. Try to examine that this noise comes from the transmission, if this is the case, as soon as possible go to your motor mechanic or you would get a break down. Finally, the second possibility is that your silent engine blocks or rubber mounts may be dead. This causes a metallic noise every time your engine moves, either because of a change of pace (acceleration or braking) or, when you pass on roads in poor condition. Examine the condition of your silentblocks and change them if necessary. If you want to have more information about rubber mounts noises on Hyundai Bayon, read this article content which gives you more information about the different types of noise and their origins.