If you notice a noise on your car, you are right to be concerned about this and take it seriously, although it is possible that nothing severe will come from it, it is also conceivable that it is the first sign of a more significant repair. A noise that shows up on a door of your Mitsubishi Asx fortunately indicates a slight correction / repair, rather than a complex repair. In order to support you in your approach, we have decided to produce this article to provide you the most likely solutions to your problem. First of all, we will look at the different origin noises of air in the door of your Mitsubishi Asx, then hinge noises and finally at other possible possibilities.
Door air noise Mitsubishi Asx
Plastic air cache noise
If you experience air noise on the doors of your Mitsubishi Asx, it is possible that it is linked to some plastic covers on the interior side panels of your door. These can come loose, hole, fall and thus produce an air intake that will inevitably generate a serious and annoying air noise in the passenger compartment. To verify that you don’t have this issue on your Mitsubishi Asx, open your doors and examine the sides of them carefully, see if all the covers are properly positioned.
Air noise seal
Air noise at the doors of your Mitsubishi Asx can also be connected to a gasketfailing or overused. Indeed, the door seal, in addition to have a defensive purpose against moisture infiltration, also has a protective function for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer give a perfect seal between the door and the car body. To verify its condition, there are two options, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water gets into. If you are in this case, go to your mechanic to have your seal changed and the door noise on your Mitsubishi Asx adjusted.
Hinge noise door hinge Mitsubishi Asx
Door noise Mitsubishi Asx, dry hinge
It is possible, according to the sort of of sound you experience, that your hinge is at the origin of them. If this is the case, you will have to verify it by opening your door and checking that the door noise on your Mitsubishi Asx comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is sufficient to solve your issue.
Noise porte Mitsubishi Asx, worn hinge
If you have followed our first advice referring to your hinge, but the issue still continues, it is conceivable that your hinge is worn out and necessitates a change. In this case, verify that despite the lubrication it still creates a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this Mitsubishi Asx noise is your problem, change your hinge.
Other possibilities
Internal part of the broken window regulator
In the other possibilities that can create door noise on Mitsubishi Asx, we can first think of the window lift, indeed, after the hinge, it is the second elaborate mechanism of the door. If broken, it can provoke vibration or even air noise. To verify its condition, remove the door trim and check that no parts are broken.
unscrewed speaker
Finally, one of the last possible possibilities for Mitsubishi Asx door noise would come from a from your vehicle’s speakers. In fact, they take place in the door and can, over time, loosen and generate a serious vibration and risk damaging themselves if you do not attach them again. Same procedure, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this article, don’t hesitate to take your automobile to your mechanic who can test your car in more detail to discover what the particular issue is that you know.
