Sometimes your car can generate noises in the front right, you are very rarely reassured by this types of noise and you right away begin to presume that you will loose a wheel or that the fix will cost you an huge sum. Then, what if you detect a noise coming from the front right of your Dodge Challenger? It may not be much and you can fix the issue yourself, but if in doubt it is better to check before a larger failure shows up. It is with this in mind that we have decided to write this content and allow you to locate the issue and find a solution. We will, through different steps review all the elements that can make noises at the front right of your Dodge Challenger. 
What are the parts that can create front right noise Dodge Challenger?
Most of our job will focus on finding the element that gives your Dodge Challenger front wheel noise. The following is a list of the elements that are most likely to be producing it and how to validate it.
Grinding noise front right wheel Dodge Challenger : the shock absorber cup
One of the most classic causes of symptoms on your Dodge Challenger front right wheel noise is advanced wear and tear on your suspension unit. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer does its task and during small jolts that compress the suspension systems. To check if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front right as you pass over holes. If these are the cups, consider swapping them quickly as this may damage other components and require more expensive repairs.
Noise while turning front right Dodge Challenger : stabilizer bar
If you detect a noise when turning on your front right wheel Dodge Challenger at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is defective. To validate the origin of the issue, you may find a lack of stability in the direction of the vehicle (it pulls to the right or it pulls to the right). In addition, you can position yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your mechanic.
Front right noise when turning Dodge Challenger : direction triangles
Finally, you may have a noise in the front right wheel on your Dodge Challenger, when you increase the speed of, brake or at any other random moment. It is likely that the reason of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also check the condition of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your auto mechanic.
Loud knocking or grinding noise front right Dodge Challenger : bearings
One of the other probable causes of symptoms of the front right grinding or knocking noise on your Dodge Challenger, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So you should check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them quickly. If, on the other hand, this noise only happens with an engaged speed, check out our article on loud noises on Dodge Challenger, you will probably find a fix to your issue.
Front right wheel noise squeaking Dodge Challenger : cardan shaft
One of the most traditional causes when noise happens on the front right of your Dodge Challenger when you turn with your vehicle is related to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Dodge Challenger, do not hesitate to consult this article to find the solution to your problem.
