Being subject to regular noise on your vehicle tends to be disturbing, a vehicle is so elaborate that it is constantly difficult to situate its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Opel Antara, we will almost certainly be able to support you. In fact, our editorial staff decided to create this content page in order to review the main causes of a clicking noise on Opel Antara. This is why, firstly, we will see what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Opel Antara coming from your suspensions.
I listen to a clicking noise on Opel Antara on my engine
Check your high engine
If you listen to a clicking noise on Opel Antara, and this sound is based at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two parts can be the triggers of these ticking noises on Opel Antara. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will hear these clicking noises, generally when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Check your low engine
If you have founded the region of origin of the Opel Antara clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two repairs are very complicated and most mechanics will suggest you to swap the engine of your Opel Antara.
Combustion problem
Finally, if you have the feeling that this clicking noise on Opel Antara is related to the combustion of your engine, there are three possible triggers of it. Check the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is plausible that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are damaged. In this circumstance, do not hesitate to read this content page which deals in detail with the different injection sounds on Opel Antara.
I listen to a clicking noise on Opel Antara in my direction
Check the condition of the gimbals
One of the most basic causes of a clicking noises in the direction of your Opel Antara is connected to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed rapidly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Opel Antara, do not hesitate to consult this complete guide.
Check the rest of your direction
Finally, when you experience a clicking noise on your Opel Antara, it is plausible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I listen to a clicking noise on Opel Antara coming from my suspensions
Check the suspension
If you experience a clicking noise on your Opel Antara once you pass a speed bump, it is really plausible that your suspension block is the reason of the sound. In fact, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To examine if this is the issue that concerns you, take a dented road and, at low speed, pay attention to the sound coming from your front axle when you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Opel Antara at the suspension level, it is highly plausible that spring wear or shock cylinder deformation may be a reason. To examine the state of the spring, place the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you see a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Opel Antara than a clicking noise, don’t hesitate to consult this article.
