Being subject to recurring noise on your vehicle tends to be disturbing, a vehicle is so complex that it is usually difficult to situate its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Nissan Pulsar, we will most likely be able to help you. In fact, our editorial staff decided to create this article in order to review the main causes of a clicking noise on Nissan Pulsar. This is why, firstly, we will see what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Nissan Pulsar coming from your suspensions.
I listen to a clicking noise on Nissan Pulsar on my engine
Examine your high engine
If you listen to a clicking noise on Nissan Pulsar, and this noise is located at the top of the engine, it means that it originates from your cylinder head and its associated parts. Two parts can be the causes of these ticking noises on Nissan Pulsar. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, generally when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this circumstance, remember to change them.
Examine your low engine
If you have distinguished the spot of origin of the Nissan Pulsar clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both situations, the risk in the long term is the breakage of the motor. These two repairs are very difficult and most mechanics will encourage you to swap the engine of your Nissan Pulsar.
Combustion problem
Finally, if you have the feeling that this clicking noise on Nissan Pulsar is linked to the combustion of your engine, there are three possible reasons of it. Examine the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to read this article which deals in detail with the different injection sounds on Nissan Pulsar.
I listen to a clicking noise on Nissan Pulsar in my direction
Examine the state of the gimbals
One of the most basic triggers of a clicking noises in the direction of your Nissan Pulsar is linked to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will affect the cardan shaft very quickly and must be replaced rapidly, otherwise the entire cardan shaft will have to be replaced. Consider taking a look at it. If you would like more detailed information about gimbals noises on Nissan Pulsar, do not hesitate to read this complete guide.
Examine the rest of your direction
Finally, when you experience a clicking noise on your Nissan Pulsar, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I listen to a clicking noise on Nissan Pulsar coming from my suspensions
Examine the suspension
If you encounter a clicking noise on your Nissan Pulsar when you pass a speed bump, it is highly possible that your suspension block is the cause of the noise. In fact, it may be the suspension cups, which, when they are out of date, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented road and, at low speed, listen to the noise coming from your front axle when ever you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you detect a clicking noise on your Nissan Pulsar at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a reason. To check the shape of the spring, position the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it denotes that most likely your springs are worn, if you find out a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider changing it or them. If you have the feeling that this noise is more like a squeaking noise on Nissan Pulsar than a clicking noise, don’t hesitate to consult this article.
